How Do Claude's and ChatGPT's IP Requirements Differ?
How do Claude's and ChatGPT's IP requirements differ? In one sentence: Claude's risk threshold is far stricter than ChatGPT's. ChatGPT still tolerates clean, little-used datacenter ranges, while Claude almost entirely insists on native residential lines from local providers, and its checks on region whitelists, sharing density, and browser-environment consistency are all extremely strict — triggering a second phone verification or a direct ban at the slightest problem.
Plenty of people run ChatGPT smoothly on the same line for half a year, then use it to register or sign in to Claude and get either a straight "region not supported" error or an account-deactivation notice after fewer than five messages. Connect to your node, open ISPing.me and check it once on the homepage, then adjust against the two platforms' risk-control temperaments — that alone avoids most of the ban traps.
Regional Restrictions Compared
The two platforms already pull clearly apart at the first step, in how wide their geographic fences are and how precisely they're checked.
| Comparison Dimension | ChatGPT (OpenAI) | Claude (Anthropic) | Practical Line-Picking Advice |
|---|---|---|---|
| Number of open countries and regions | Covers 180+ countries and regions worldwide, a fairly wide range | A tighter open list, with strict blocking of some niche regions and island nations | Prioritise the US, UK, Japan, Singapore, and other countries on both whitelists |
| Tolerance for cross-border broadcast ranges | Some mainstream broadcast ranges still work fine as long as purity is up to standard | Extremely hostile to cross-border broadcast ranges; a geographic conflict across databases gets rejected outright | Avoid broadcast nodes; pick native ranges whose registration location matches the landing location |
| Purity threshold | <35 Fairly Pure is enough for daily use; <20 Pure is recommended when binding a card | Registration and daily use should both be strictly held at <20 Pure | Picking a <20 Pure line works for both platforms |
| Sharing-count tolerance ceiling | The 10-100 Good tier is mostly smooth; little-used ranges can occasionally be relaxed | Must be kept in the 1-10 Excellent tier; passing 100 people very easily triggers verification | Refuse multi-user shared proxy pools; prioritise single-household dedicated static lines |
| Sensitivity to environment leaks | Mainly checks the exit region and basic proxy characteristics | Deeply cross-checks WebRTC, DNS, IPv6, and system timezone | Run a full leak-prevention self-check before every launch to make sure nothing slips through |
On the open-region list, OpenAI covers the vast majority of regular overseas regions — apart from mainland China, Hong Kong, Macao, and a few sanctioned regions, most countries in Southeast Asia, Latin America, and Europe are directly accessible. Anthropic reviews its open regions far more cautiously, and many seemingly ordinary overseas nodes aren't on its service whitelist at all. Worse still, Claude is extremely sharp at spotting cross-border broadcast ranges: as soon as one range shows the US in one geographic database and Europe in another, the page immediately pops up a region not supported block. For more detail, see How Do AI Platforms Enforce Region Restrictions?.
IP Purity Requirements Compared
Beyond the range of regions, the two platforms' tolerance for an exit's historical reputation and network type is on a completely different level.
To judge whether a line measures up, the core things to look at are the IP purity score in the test report and the underlying network registration. The report splits risk scores into five tiers: <20 Pure, <35 Fairly Pure, <50 Fair, <70 Suspicious, and ≥70 High Risk. For OpenAI, if you're using a self-built server from a little-used cloud provider, even though the underlying type is a datacenter IP, daily logins and chats usually won't be blocked as long as it hasn't been shared by many people and the score stays within <35 Fairly Pure.
Over at Anthropic, commercial datacenter ranges are practically priority-monitoring targets. As long as your exit ASN is registered under a cloud company like AWS, DigitalOcean, or Vultr, even if the server was launched one minute ago and scores under 20, it will very likely get stuck at phone SMS verification during registration — or get auto-banned by the system right after verification. To use Claude reliably, your exit must first be a native residential IP assigned by a local consumer broadband provider, and the overall score must be strictly held in the <20 Pure tier.
Tolerance for crowding is just as far apart. The report splits sharing count into five tiers: 1-10 Excellent, 10-100 Good, 100-500 Poor, 500-5000 Very Poor, and 5000+ Dangerous. Take a dynamic line with 150 concurrent users (the 100-500 Poor tier): using it for the free version of ChatGPT might just mean clicking through a few extra image captchas now and then, but sign in to Claude with it and a risk alert triggers almost the moment you submit your first message — and in serious cases a strict KYC identity verification demand pops up that an ordinary individual user simply can't satisfy with overseas documents, and the account is effectively dead.
Environment Consistency Requirements Compared
Beyond the network exit itself, the two platforms also check "does the local device environment match the exit?" at very different depths.
OpenAI's risk controls focus mainly on account login state, payment card ranges, and obvious high-concurrency bot behaviour, and its checks on underlying browser hardware characteristics are relatively gentle. As long as your exit is clean and you don't jump between countries in a short time, even forgetting to change your computer's system timezone now and then generally won't get you banned outright for a timezone mismatch.
Anthropic takes environment cross-checking to the extreme. Within seconds of opening the page and establishing a connection, front-end scripts simultaneously grab your browser's WebRTC local-network address, the home of your local DNS resolver, your IPv6 exit status, and your operating system's timezone offset. Even if you paid a premium for a <20 Pure dedicated residential line, if your local computer has WebRTC passthrough enabled and leaks a domestic LAN address, or the system timezone is still on Beijing time while the exit is in Los Angeles, the system immediately judges that you're faking your network environment. So before every formal sign-in, it's strongly recommended to first run the dedicated Claude check to confirm whether your local environment measures up. For the specific self-check and blocking steps, see Check These Three Before Using Claude: WebRTC, DNS, and IPv6 Leaks.
Ban Mechanisms Compared — and Can One IP Serve Both?
There's also a big difference in how the two platforms hand out punishments, and how far the fallout spreads. OpenAI's risk control leans toward "gradual warnings": faced with a mild abnormality, it usually first limits some model call frequency, pops up an image verification, or refunds a subscription over a violating payment — only banning an account outright once bulk registration or malicious abuse is confirmed.
Anthropic's ban mechanism is known for "zero tolerance and fast association". Once a risk red line is crossed, the system often gives no second-verification buffer at all and silently deactivates the account in the background, and the ban reaches straight through the whole associated range — every backup account under the same exit, every historical account signed in with the same browser fingerprint, and even the same card payment profile all get blacklisted together. Whether multiple AI accounts sharing one IP will get linked, see Will Multiple AI Accounts Sharing One IP Get Linked?.
Many users ask: can one high-quality line sign in to both platforms at once?
The answer is yes, but you have to configure it to the "aim at the higher bar" standard. Since Claude's threshold is higher than ChatGPT's across the board, as long as you follow Claude's top standard — picking a native residential IP from the US, Japan, or the UK, keeping the risk score in the <20 Pure tier, holding concurrent users in the 1-10 Excellent tier, and fully blocking WebRTC, DNS, and IPv6 leaks — one dedicated line can serve both AI tools perfectly well. The two belong to different companies, their account databases don't connect to each other, and as long as you don't run high-concurrency automated scripts on the same line, using both at once actually looks more like the daily work pattern of a real overseas office worker. For the detailed line-picking parameters, compare with What Does ChatGPT/Midjourney Require from an IP?. For how to choose between residential and datacenter proxies, see Residential Proxy vs. Datacenter Proxy: Which Should You Choose?; for whether your proxy is leaking your real IP, see How to Test Whether Your Proxy Is Leaking Your Real IP?.
FAQ
Why does a node that works fine for ChatGPT get me banned the moment I sign in to Claude?
Because Claude's risk threshold sits far above ChatGPT's. ChatGPT is fairly tolerant of datacenter IPs with a risk score around 40, but Claude blacklists most datacenter ranges and strictly checks WebRTC and DNS leaks — a single failed item can trigger an instant ban.
Will using one dedicated residential IP for both ChatGPT and Claude link the accounts?
No. OpenAI and Anthropic are two completely independent companies, and their account data isn't shared. As long as the residential IP is used only by you and meets Claude's purity and environment-consistency requirements, signing in to both platforms at once is very safe.
Do Claude and ChatGPT both require a native IP?
ChatGPT has no hard requirement for a native IP — a clean broadcast IP works fine as long as the region is right. But Claude depends on native residential IPs to a very high degree, and registering Claude with a broadcast or datacenter IP sharply raises the chance of phone verification and bans.
When using the Claude and ChatGPT apps on a phone, do the IP requirements change?
The core requirements are the same as on the web, but phone apps request more system permissions — the Claude app in particular reads the phone's location permission and system timezone. Before using it, turn off the app's precise location permission and set the phone's timezone to match the exit IP.
Notes
- When using both, always take Claude's standard as the environment baseline: don't test Claude with a datacenter node that barely runs ChatGPT — once a risk event gets your browser fingerprint flagged, it can easily spill over to other overseas accounts in the same environment.
- Never switch between exits in different countries while an account is active: once you've picked a static line in the US or Japan, stick with it long term — switching countries in a short time is almost equivalent to triggering a security lock in Anthropic's system.
- Use a legitimate physical foreign-currency card first when upgrading to a paid membership: both platforms are tightening their blocks on virtual card ranges, so when binding a card for payment, make sure the exit's country, the card issuer's region, and the billing postcode all match.
Check if your IP works with Claude
Check your network environment on ISPing.me — confirm the purity, sharing count, and risk signals, and only use it once it passes.
Check nowRelated reading:What Does ChatGPT/Midjourney Require from an IP?Why Does Claude Ban Accounts? IP and Environment Consistency ExplainedClaude Says Your Region Isn't Supported — What to DoClaude Asks for KYC Identity Verification — Causes and How to Avoid ItCheck These Three Before Using Claude: WebRTC, DNS, and IPv6 LeaksWhat Is IP Purity? How to Read the Risk ScoreResidential IP vs. Datacenter IP: What's the Difference