Check These Three Things Before Using Claude: WebRTC, DNS, and IPv6 Leaks
Connected proxy doesn't mean no leaks: WebRTC can bypass the proxy and expose your real IP, DNS lookups may go through your local ISP, and IPv6 without split tunneling goes straight out. If any one of the three leaks, Claude sees your real region — check all three first, then the exit region and time zone and language, and only open it when everything passes.
The proxy software says "connected", and an IP lookup shows the US — but that only proves web traffic went through the proxy. The browser has three more side doors that can hand your real location straight over. Before checking Claude, seal all three.
Three side doors — not one may stay open
Blocking only the front door isn't enough. Web traffic going through the proxy doesn't mean all traffic does — the browser and the system have three more independent channels:
- WebRTC: the browser probes your real public IP, and extension-based proxies often can't intercept it;
- DNS: DNS requests go to the local ISP, exposing your real region;
- IPv6: when the proxy only handles IPv4, v6 traffic goes out directly.
The three side doors are independent — blocking one doesn't block them all. Risk systems don't need all three open: a single leak exposes your real region. And the leak signals corroborate each other: exit IP in the US, DNS domestic, IPv6 domestic — three signals pointing at the same real region are harder to explain away than one.
Blocking only the front door isn't enough
The browser probes your real public IP; extension-based proxies often can't intercept it
DNS requests go to the local ISP, exposing your real region
When the proxy only handles IPv4, v6 traffic goes straight out unprotected
WebRTC leaks: the browser's built-in "informant"
WebRTC is the technology browsers use for audio and video calls: it probes your real public IP via the STUN protocol to establish a direct connection. The problem is that many proxies — especially browser-extension proxies — only handle ordinary web traffic and can't control WebRTC's probing: any website can run a script and read the real IP behind your proxy. The exit shows the US while WebRTC reads a domestic IP, and your location is exposed on the spot. For how to test whether your proxy is leaking your real IP, see How to Test Whether Your Proxy Is Leaking Your Real IP?.
DNS leaks: requests went to the local ISP
Before you visit a website, a DNS lookup has to happen. If the lookup doesn't go through the proxy but is sent to your local ISP's DNS server, then to the target website and to risk systems, your "resolution location" is your real location.
The classic picture of a DNS leak: the exit IP is in the US, but the DNS server is domestic — two contradictory signals, more suspicious than being wrong on both counts. For details, see What Is a DNS Leak? How to Detect It, and this site tests the resolution exit against the IP exit with 24 random domains — different countries means a leak.
IPv6 leaks: the tunnel was only half built
Many proxies only proxy IPv4 traffic, while IPv6 goes straight out over the local network. If a website receives your request over IPv6, the location it sees is your real region. Worse, in a dual-stack environment you can hardly tell yourself: the IPv4 check shows abroad and everything looks fine — while IPv6 is running around unprotected.
The essence of an IPv6 leak is a tunnel built only halfway. The proxy client took over IPv4 but not IPv6, so the system has two exits at once, and websites pick whichever one they prefer. If you don't use IPv6, the easiest fix is to turn it off in the system or on the router; if you do use it, make sure the client sends v6 traffic through the tunnel too. For details, see IPv6 vs. IPv4: What's the Difference, and Which One Am I Using?.
To tell whether IPv6 is leaking, look at whether there's a v6 exit and where it's located: if the location is your real region, it's a leak.
Leak check reference table
| Leak | What you see when it leaks | How to confirm | Common fixes |
|---|---|---|---|
| WebRTC | Your real IP appears among the candidate IPs | Check the candidate IPs the browser can read | Block with an extension or change settings (see below) |
| DNS | DNS server location differs in country from the exit IP | Test the resolution exit with 24 random domains | Route DNS through the proxy or switch to encrypted DNS |
| IPv6 | v6 exit location is your real region | Check for a v6 exit and its location | Send v6 through the tunnel or disable IPv6 entirely |
| Time zone & language | Time zone and language are in a different country from the exit IP | Check the system time zone and browser language settings | Align time zone and language with the exit region |
Use this table by checking items off one by one — don't sample. If any one of the three leaks, region detection and account risk controls are affected. Before using Claude, check all three together with the exit region and the time zone and language; for how to keep IP, time zone, and language aligned, see IP, Timezone, and Language: How to Keep Your Account Environment Consistent. Five minutes rules out the vast majority of common pitfalls. After changing settings, retest: only the test result decides whether a setting took effect.
How leaks affect different situations
When using Claude / ChatGPT. Region detection is the most direct impact: the exit shows a supported region while the leak points to an unsupported one, and the account may be told outright that the region isn't supported, or be asked for extra verification at sign-up or payment; see Why Does Claude Ban Accounts? IP and Environment Consistency Explained. Claude is stricter about region consistency than most websites; seeWhat to Do When Claude Says Your Region Isn't Supported?.
When using streaming / payment services. These services also make regional decisions and risk assessments based on IP location. Once a DNS leak exposes your real region, the regional content library may switch outright (see Why Can't I Watch Netflix? How IPs Affect Streaming Unblocking), and payment may be refused because the region doesn't match the card. The impact isn't on "whether you can open the website" but on "being treated as a person from another region once you're in".
When working remotely / browsing daily. Daily browsing tolerates leaks more: city-level differences are barely noticeable (for whether a mismatch between IP location and real location matters, see Does It Matter If Your IP Location Doesn't Match Your Real Location?). But when it comes to the company intranet or sensitive account logins, a leak can still trigger a login alert from an unusual location.
Are all three of your leaks sealed? Check it free on ISPing.me right now: Claude Check → — WebRTC, DNS, IPv6, and region consistency, all in one view. Open Claude only when everything passes.
How to turn off WebRTC: Chrome and Firefox
Chrome has no native switch, so you need an extension to stop leaks: install a WebRTC leak protection extension and, in its settings, choose "only allow proxy IPs" or "disable non-proxy addresses". Don't assume installing it is enough — confirm with the browser information check: only when your real IP no longer appears in the results is it properly sealed. Browser upgrades and disabled extensions can break the protection, so retesting regularly matters more than installing once.
Firefox, by contrast, lets you change a setting directly: type about:config in the address bar, set media.peerconnection.enabled to false, and restart to apply (video calls will be affected — you can change it back afterwards).
Steps to track down an IPv6 leak
Many proxy clients only proxy IPv4, leaving IPv6 to exit locally — one check exposes it. Follow this order:
First, confirm whether you have IPv6 at all. First check with the tools introduced in IP Quality Check Tools Compared: 8 Popular Platforms Reviewed to see whether the results show a v6 address, or check your machine's network details directly. No v6 exit means this item passes outright; only if there is a v6 exit do you need to keep digging.
Next, check whether the client splits traffic. If v6 in the test still points to your real region, the client isn't sending v6 traffic through the tunnel — in the client, turn off direct v6 connections (force tunnel mode), or temporarily disable IPv6 in the system. Pick one method, not both: if you change both at once, you won't know which one worked.
After changing, retest. Keep going until the test results no longer show a v6 address from your real region — only then is it fixed. Retest twice in a row, a few minutes apart, to confirm the result is stable. Fixing DNS leaks works the same way: first check the proxy software's DNS settings and make sure DNS goes through the proxy channel (TUN mode is usually more thorough than a plain system proxy); then manually specify trusted DNS servers (such as 1.1.1.1 or 8.8.8.8) and avoid your ISP's default DNS; after changing, retest and confirm the result turns green.
FAQ
The proxy shows connected — why can my real region still be found?
Because the proxy only handles web traffic. WebRTC, DNS, and IPv6 are three side doors that may still be local — any one of them leaking exposes your real region.
Does it matter if only one of the three leaks?
Yes, it matters. Risk systems only need one leak to see your real region. Leaks aren't proportional — one is enough. And the signals from the three side doors corroborate each other, pointing to the same real region.
I don't use IPv6 — can I just turn it off?
Yes. If you don't use IPv6, turning it off in the system or on the router is the easiest fix — that item passes right away; if you do use IPv6, make sure the client sends v6 traffic through the tunnel too, or it will still leak.
If all three are clean, will Claude's risk controls definitely never trigger?
No. Three clean items are only the foundation of region consistency — IP type, purity, and payment details are also looked at, and the whole environment has to be consistent to stay safe. Purity and risk scores are heuristic estimates based on public information — treat the results as a reference only; see What Is IP Purity?
Notes
Test results only reflect the state at the time of testing — proxy settings, browser upgrades, and disabled extensions can all reopen a side door you previously sealed, so retest before every important action. Claude's specific risk policies follow what's published officially; this article only covers how to check for leaks and promises no account outcome. Before changing settings, note the original values so you can change them back if something breaks. For the full criteria for choosing a proxy, seeHow to Choose a Proxy IP — don't judge by price alone.
Check all three leaks in one pass
The Claude check looks at WebRTC, DNS, IPv6, and region consistency together — only open it when everything passes. Enter your IP on ISPing.me to see the three leak results and whether the exit region matches
Check nowRelated reading:What Is a DNS Leak? How to Detect ItWhat's the Difference Between IPv6 and IPv4? How to Tell Which One You're UsingWhat to Do When Claude Says Your Region Isn't Supported?Why Does Claude Ban Accounts? IP and Environment Consistency ExplainedHow to Choose a Proxy IP: Pitfalls to Avoid and Selection CriteriaWhat Is IP Purity? How to Read the Risk ScoreWhat Does ChatGPT/Midjourney Require of Your IP?