IPv6 vs. IPv4: What's the Difference, and Which One Am I Using?
IPv6 and IPv4 are two parallel networks: IPv4 uses 32-bit addresses, about 4.3 billion in total; IPv6 uses 128-bit addresses, effectively unlimited. When a proxy handles only IPv4, IPv6 traffic goes out via the local connection, leaking both location and DNS — so either let the client handle the dual stack, or turn IPv6 off.
When checking an IP you sometimes see a very long address full of colons — that's IPv6. How is it actually different from the IPv4 you use every day? This article first explains the address formats, then the leak pitfalls that are easiest to hit in a dual-stack setup.
How the address formats differ
IPv4: 32-bit addresses in dotted-decimal form, e.g. 61.188.77.112 — about 4.3 billion in total, long since exhausted. IPv4 address exhaustion is the fundamental reason for pushing IPv6: once addresses ran out, ISPs had to use NAT to let many people share one public IPv4 address — which is also why many residential broadband plans have no public IPv4. For the impact of sharing one address, see What Is the IP Sharing Count, and Why Does It Matter?; for the difference between static and dynamic addresses, see What's the Difference Between a Static IP and a Dynamic IP?.
IPv6: 128-bit addresses in colon-separated hexadecimal, e.g. 2408:8406:1a:1::1 — enough to give every grain of sand on Earth its own address. With addresses to spare, every device can have its own globally unique public address — no NAT needed. The formats are easy to tell apart: IPv4 is 4 decimal segments joined by dots, IPv6 is 8 hexadecimal segments joined by colons, with runs of zeros often compressed into ::.
| Dimension | IPv4 | IPv6 |
|---|---|---|
| Address length | 32-bit | 128-bit |
| Format | 4 decimal segments, e.g. 192.168.1.1 | 8 hexadecimal segments, e.g. 2001:db8::1 |
| Total count | About 4.3 billion — exhausted | Almost unlimited |
| NAT | Usually needed — shared by many people | Barely needed — devices connect directly |
| Adoption | The current mainstream — best compatibility | The future direction — gradually gaining adoption |
IPv6 and IPv4 are two separate networks
The key insight: IPv6 and IPv4 are two protocols that don't talk to each other. Your device may have both an IPv4 and an IPv6 address (dual stack), and which one is used for a website depends on whether the site supports IPv6. Sites that support IPv6 use it first; the rest use IPv4 — the same site may use a different protocol at different times.
This also means the egress IP, geolocation, and risk status of IPv4 and IPv6 are independent of each other. An IPv4 result you found on ISPing.me says nothing about your IPv6 situation: a clean IPv4 doesn't mean a clean IPv6, and a residential IPv4 doesn't mean the IPv6 comes from the same carrier's residential network. For the native vs. broadcast distinction, see What Is a Native IP, and How Is It Different From a Broadcast IP?. Check each address separately — the two addresses are two independent profiles.
The state of IPv6 today
China's three major carriers assign IPv6 to residential broadband by default — it's just that the router or optical modem may not have it switched on, so many people use IPv6 without knowing it. Major sites (Baidu, Taobao, Bilibili) all support IPv6, and a large share of everyday browsing already runs over it.
But risk-control systems cover IPv6 less thoroughly than IPv4, so there's less “purity” data for IPv6. Purity = 100 − risk score, and this site's risk score has five tiers: <20 Pure, <35 Fairly Pure, <50 Fair, <70 Suspicious, and ≥70 High Risk. The risk score is a heuristic estimate based on public information, not an official ban verdict from any platform — treat it as a reference only. With less IPv6 risk data, the same IPv6 address may behave more differently across platforms, so don't apply one IPv6 check result directly to IPv4, or vice versa. For details, see What IP purity means.
There's another real-world problem: many proxies and VPNs handle only IPv4 traffic, while IPv6 connects directly and exposes your real address. That's DNS leaks is a different kind of leak — see “dual-stack leak” below for how it works.
What IPv6 means in different scenarios
Everyday browsing. In a dual-stack setup, everyday use feels no different — sites prefer IPv6, and speeds are usually no worse than IPv4. The one thing to watch: if the IPv6 switch on your home router or optical modem is off, your devices get no IPv6 address at all — you're using only half the network, so check the IPv6 switch first when troubleshooting.
When using a proxy or VPN. This is the scenario most likely to go wrong. The proxy only handles IPv4, so sites still see your real address over IPv6 — like running naked with the proxy on. After turning the proxy on, confirm that IPv6 is handled too; you can use this site's Disguise Check to see your overall exposure, and for choosing the proxy protocol itself, see How to Choose a Proxy IP. For how to check all three leaks together, see Check These Three Things Before Using Claude: WebRTC, DNS, and IPv6 Leaks.
Cross-border, sign-up, and risk-sensitive scenarios. The geolocation and risk status of IPv6 and IPv4 are independent of each other: when you sign up, a platform may see both addresses at once, and mismatched geolocations raise suspicion. For what AI platforms require of an IP, see What Does ChatGPT/Midjourney Require of Your IP?. Residential and datacenter IPs have different baselines — the same blacklist hit costs a datacenter IP more — so comparing scores across types is meaningless. For how types differ, see Residential vs. Datacenter IPs: What's the Difference?.
Is your IPv6 leaking? On ISPing.me, click “View IPv6” for a free check, and check the IPv6 address and geolocation, then follow the “dual-stack leak” checklist below to confirm whether the proxy is handling it.
How to tell if you have IPv6
Three steps to confirm: first, visit test-ipv6.com — it tells you your IPv6 connectivity score directly; second, on the ISPing.me homepage, click the “View IPv6” button next to the IP address to see your device's current IPv6 address and geolocation; third, if it shows nothing, check whether the IPv6 switch on your optical modem or router is on. If it's on and still nothing shows, your ISP may not have assigned IPv6, or the upstream network may not support it — then just use IPv4, after first figuring out which link in the chain is the problem.
Dual-stack leak: the proxy only fixed the IPv4 half
Home broadband and mobile data are usually dual-stack IPv4 + IPv6: if the proxy client handles only v4 traffic, v6 traffic goes straight out via the local connection — like running naked with the proxy on. Leaks come in two forms: DNS leaks, where lookups go through the local carrier's DNS and expose which domains you queried; and IP leaks, where the v6 address directly exposes your real location. To investigate, start with How to Test Whether Your Proxy Is Leaking Your Real IP? and check whether the results contain a v6 address from your real location or your local DNS — if they do, that's a leak. For troubleshooting steps when geolocation looks wrong, see What to Do When IP Geolocation Looks Wrong.
Fixing the dual-stack leak: three settings
First, confirm in the client settings that IPv6 is being handled. Some clients call it “IPv6 split routing” or “dual-stack proxy” — if it's not on, it's not fixed. Don't judge by the switch itself; re-test after changing it.
Second, turn IPv6 off at the router or system level. This is a temporary fix, for cases where only v4 is used. Once it's off, the device has only an IPv4 egress, so the proxy handling v4 means handling all traffic. The cost is giving up IPv6's direct-connection advantage — only suitable when you clearly don't need IPv6.
Third, re-test after making the change. Re-test with Global Ping and the DNS check: it's only fixed when egresses in multiple locations agree and no v6 address from your real location shows up. If your client doesn't support v6 handling, switching to one that supports dual stack is easier than patching around it. When re-testing, look at both the DNS results and the IP results — checking only one can miss a leak on the other path.
FAQ
Is it normal to have IPv4 but no IPv6?
Normal. Your ISP may not have assigned IPv6, or the IPv6 switch on your router or optical modem may be off — everyday use is unaffected, and IPv4 alone is fine. First follow the three steps above to find which link in the chain is the problem.
IPv6 addresses are so long — what if I can't memorize them?
You don't need to. IPv6 addresses are assigned automatically by the system — just copy and paste. Everyday use, IP lookups, and allowlist entries are all copy-paste; nobody memorizes addresses to get online.
With a proxy on, can IPv6 still leak my real address?
Yes. If the proxy client handles only IPv4, IPv6 goes out via the local connection and directly exposes your real location — either let the client handle the dual stack, or turn IPv6 off, then re-test with the DNS leak check.
Is IPv6 cleaner than IPv4?
Not necessarily. IPv6 simply has less risk data available — that doesn't make it cleaner. The egress, geolocation, and risk status of v4 and v6 are independent, so check and judge each separately; don't infer one from the other.
Notes
IPv6 and IPv4 are two separate networks: check IPs, judge risk, and hunt for leaks separately for each. The risk score is a heuristic estimate based on public information, and each platform's actual policies differ, so treat results as a reference only. A leak when the proxy handles only IPv4 doesn't mean the proxy is broken — it means the dual stack was only half fixed; always re-test after fixing, and it's only done when the re-test passes.
See your IPv6 address
On ISPing.me, click “View IPv6” to see the IPv6 address and geolocation, then use the DNS leak check to confirm whether there's a leak
Check nowRelated reading:What Is a DNS Leak, and How Do You Check for It?What Is a Native IP, and How Is It Different from a Broadcast IP?What's the difference between static and dynamic IPs?What Is IP Purity? How to Read the Risk ScoreHow to Choose a Proxy IP: Pitfalls to Avoid and What to Look ForWhy Does Dual ISP Still Show as an "IDC Datacenter IP"?What Does ChatGPT/Midjourney Require of Your IP?